document number: 42093 for technical questions, contact: spresale@vishay.com www.vishay.com revision: 12-mar-09 25 film capacitors, high current, wrap-and-fill, metallized polypropylene v-735 p vishay sprague features ? wire or lug terminals ? high stability ? high ripple to 30 a ? low inductance ? low esr ? compliant to rohs directive 2002/95/ec performance characteristics operating temperature: - 55 c to + 105 c capacitance range: 1.0 f to 30.0 f capacitance tolerance: 10 %, 5 % dc voltage rating: 100 wvdc to 400 wvdc equivalent series resistance: 20 khz to 100 khz dissipation factor: 0.1 % maximum measured at 1000 hz, at + 25 c v / t : 10 v/ms maximum voltage test: 200 % of rated voltage for 2 min insulation resistance: measured at 100 wvdc after a 2 min charge. at + 25 c: 200 000 m /f, or 400 000 m minimum vibration test (condition b): no mechanical damage, short, open or intermittent circuits. dc life test: 140 % of rated voltage for 1000 h at + 105 c. no visible damage. no open or short circuits. maximum cap 1.0 % minimum ir = 50 % of initial limit maximum df = 0.10 % humidity test: 95 % relative humidity at + 40 c for 250 h. no visible damage. maximum cap 1.0 % minimum ir = 20 % of initial limit maximum df = 0.12 % physical characteristics pull test: wire leads: - 5 lb (2.3 kg) for one min. no physical damage. terminal lugs: - 10 lb (4.5. kg) for one min. no physical damage. lead bend: after three complete consecutive bends. no damage. marking: sprague ? trademark, type or part number, capacitance and voltage. note (1) leads to be within 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge (terminal style l only). dimensions in inches [millimeters] terminal style l d max. l 0.062 [1.57] tinned solid copper w ire (1) d max. < 0.700 [17.78], n o. 20 a w g w ire 0.032 [0.812] n ominal diameter d max. 0.700 [17.78], n o. 18 a w g w ire 0.040 [1.016] n ominal diameter 1.750 [44.45] min. 1.750 [44.45] min. d max. terminal style h tinned solid copper l u g l 1 0.062 [1.57] l 2 0.062 [1.57] l 0.062 [1.57] 0.156 0.005 dia. [3.96 0.13] 0.360 0.005 [9.14 0.13] 0.312 [7.9] min. 0.0032 0.002 [0.81 0.05] l 1 = l + 0.766 [19.46] l 2 = l + 0.437 [11.10]
v-735 p vishay sprague film capacitors, high current, wrap-and-fill, metallized polypropylene www.vishay.com for technical questions, contact: spresale@vishay.com document number: 42093 26 revision: 12-mar-09 notes (1) part numbers listed are for a capacitance tolerance of 10 %. to specifiy 5 % tolerance, change the ?x9? in the part number to ?x5?. ? other capacitance values and volta ge ratings are available upon request standard ratings in inches [millimeters] capacitance (f) part number (1) case size esr limit (m ) 20 khz to 100 khz maximum ripple current (a rms ) at 20 khz - 100 khz case temperature at d l + 25 c + 35 c + 45 c + 55 c + 65 c + 75 c + 85 c terminal style l - units with wire leads 100 wvdc 1.0 v-735p105x9100l 0.531 [13.49] 0.750 [19.05] 15.0 9.2 8 .5 7. 8 7.0 6.0 4.9 4.5 2.0 v-735p205x9100l 0.596 [15.14] 0.93 8 [23. 8 1] 12.0 10. 8 10.0 9.1 8 .2 7.0 5. 8 5.3 3.0 v-735p305x9100l 0.717 [1 8 .21] 0.93 8 [23. 8 1] 11.0 12.1 11.2 10.3 9.2 8 .0 6.5 5.9 5.0 v-735p505x9100l 0.733 [1 8 .62] 1.250 [31.75] 10.0 13. 8 12.7 11.6 10.4 9.0 7.4 6.7 10.0 v-735p106x9100l 0. 8 9 8 [22. 8 1] 1.500 [3 8 .10] 9.0 15.0 15.0 14.2 12.7 11.0 9.0 8 .2 20.0 v-735p206x9100l 1.000 [25.40] 2.250 [57.15] 8 .0 15.0 15.0 15.0 15.0 13.6 11.1 10.0 30.0 v-735p306x9100l 1.200 [30.4 8 ] 2.250 [57.15] 6.0 15.0 15.0 15.0 15.0 15.0 12.4 11.4 200 wvdc 1.0 v-735p105x9200l 0.512 [13.01] 1.250 [31.75] 20.0 7.3 7.3 7.3 7.3 7.2 5.9 5.4 2.0 v-735p205x9200l 0.69 8 [17.73] 1.250 [31.75] 15.0 12.0 12.0 11.3 10.1 8 .7 7.1 6.5 3.0 v-735p305x9200l 0.747 [1 8 .97] 1.500 [3 8 .10] 13.0 15.0 13. 8 12.6 11.3 9. 88 .0 7.3 5.0 v-735p505x9200l 0. 8 62 [21. 8 9] 1.750 [44.45] 11.0 15.0 15.0 14.7 13.1 11.4 9.3 8 .5 10.0 v-735p106x9200l 1.030 [26.16] 2.250 [57.15] 9.0 15.0 15.0 15.0 15.0 13. 8 11.3 10.3 20.0 v-735p206x9200l 1.440 [36.5 8 ] 2.250 [57.15] 6.0 15.0 15.0 15.0 15.0 15.0 14.1 12. 8 400 wvdc 1.0 v-735p105x9400l 0.713 [1 8 .11] 1.500 [3 8 .10] 19.0 9.5 9.5 9.5 9.5 9.5 7. 8 7.1 2.0 v-735p205x9400l 0. 8 95 [22.73] 1.750 [44.45] 15.0 15.0 15.0 15.0 13.4 11.6 9.5 8 .7 3.0 v-735p305x9400l 1.0 8 6 [27.5 8 ] 1.750 [44.45] 12.0 15.0 15.0 15.0 15.0 13.1 10.7 9. 8 5.0 v-735p505x9400l 1.192 [30.2 8 ] 2.250 [57.15] 10.0 15.0 15.0 15.0 15.0 15.0 12.5 11.4 10.0 v-735p106x9400l 1.66 8 [42.37] 2.250 [57.15] 6.0 15.0 15.0 15.0 15.0 15.0 15.0 14.1 terminal style h - units with terminal lugs 100 wvdc 1.0 v-735p105x9100h 0.531 [13.49] 0. 8 75 [22.23] 15.0 10.3 9.5 8 .7 7. 8 6.7 5.5 5.0 2.0 V-735P205X9100H 0.596 [15.14] 1.062 [26.97] 12.0 12.0 11.0 10.0 8 .9 7. 8 6.3 5. 8 3.0 v-735p305x9100h 0.717 [1 8 .21] 1.062 [26.97] 11.0 13.3 12.3 11.2 10.0 8 .7 7.1 6.5 5.0 v-735p505x9100h 0.733 [1 8 .62] 1.375 [34.93] 10.0 14. 8 13.7 12.5 11.2 9.7 7.9 7.2 10.0 v-735p106x9100h 0. 8 9 8 [22. 8 1] 1.625 [41.2 8 ] 9.0 17. 8 16.5 15.0 13.5 11.7 9.5 8 .7 20.0 v-735p206x9100h 1.000 [25.40] 2.375 [60.33] 8 .0 21.6 20.0 1 8 .3 16.4 14.2 11.6 10.6 30.0 v-735p306x9100h 1.200 [30.4 8 ] 2.375 [60.33] 6.0 24.3 22.5 20.5 1 8 .4 15.9 13.0 11.9 200 wvdc 1.0 v-735p105x9200h 0.512 [13.00] 1.375 [34.93] 20.0 7.3 7.3 7.3 7.3 7.3 6.4 5. 8 2.0 v-735p205x9200h 0.69 8 [17.73] 1.375 [34.93] 15.0 14.3 13.3 12.1 10. 8 9.4 7.7 7.0 3.0 v-735p305x9200h 0.747 [1 8 .97] 1.625 [41.2 8 ] 13.0 15.9 14.7 13.5 12.0 10.4 8 .5 7. 8 5.0 v-735p505x9200h 0. 8 62 [21. 8 9] 1. 8 75 [47.63] 11.0 1 8 .3 17.0 15.5 13.9 12.0 9. 88 .9 10.0 v-735p106x9200h 1.030 [26.16] 2.375 [60.33] 9.0 22.4 20.7 1 8 .9 16.9 14.6 12.0 10.9 20.0 v-735p206x9200h 1.440 [36.5 8 ] 2.375 [60.33] 6.0 27.4 25.4 23.2 20.7 17.9 14.7 13.4 400 wvdc 1.0 v-735p105x9400h 0.713 [1 8 .11] 1.625 [41.2 8 ] 19.0 9.5 9.5 9.5 9.5 9.5 8 .3 7.5 2.0 v-735p205x9400h 0. 8 95 [22.73] 1. 8 75 [47.63] 15.0 15.0 15.0 15.0 14.2 12.3 10.0 9.1 3.0 v-735p305x9400h 1.0 8 6 [27.5 8 ]1. 8 75 [47.63] 12.0 21.1 19.5 17. 8 15.9 13. 8 11.3 10.3 5.0 v-735p505x9400h 1.192 [30.2 8 ] 2.375 [60.33] 10.0 24.4 22.6 20.6 1 8 .5 16.0 13.1 11.9 10.0 v-735p106x9400h 1.66 8 [42.37] 2.375 [60.33] 6.0 30.0 27. 8 25.4 22.7 19.7 16.1 14.7 ordering information v-735p 105 x9 100 l type capacitance capacitance tolerance dc voltage rating terminal style this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. x9 = 10 % x5 = 5 % this is expressed in volts. l = wire leads h = lugs
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
